During our time at home my daughter, Olivia, and I wanted to do something to support our community. Olivia found a pattern on Circut Design Space and she made a ton of masks using her Cricut Maker and that pattern. To aid in teaching how to sew a mask I made a video while Olivia was sewing one (you can see it HERE.)
I wanted to make some fabric face masks the old school way with a pattern and scissors so that I could share how to make them without a Circut Machine.
Please note these cloth masks are not a substitute for medical-grade (N95) masks for healthcare workers refer to the Centers For Disease Control (CDC) for information also how to remove your mask and washing your hands.
If you would like to order a mask please see Olivia’s shop.
How to Sew Face Masks
To have a little fun I wanted to use printed fabrics in hopes of bringing joy to someone. After selecting my fabrics I prepared them for pre-washing by serging the cut edges to prevent fraying.
Sewing a Pleated Face Mask
If you would like to save this inspiration for later please click here to pin to your Pinterest board.
This post contains affiliate links. This means that if you purchase from one of these links I will make a small commission, but rest assured you will not pay more for any products.
Notice the nose area of the pleated masks is curved where I installed a piece of wire thus making these masks more comfortable to wear.
Supplies for a homemade face mask (pleated style)
- 1/3 yard of the face fabric (tightly woven cotton fabric)
- 1/2 yard of the lining and ties fabric (tightly woven cotton fabric)
- Bias tape maker
- Sewing machine
- Fabric marker
- Rotary cutter
- Cutting mat
- Pleated Face Mask (pattern pieces)
Using a rotary cutter and long ruler cut two bias strips of fabric one inch wide by 44 inches long for each face masks.
Making the Bias Tape
Purchased bias tape is only available in limited colors and can be pricey. For this reason, I like to make my bias tape with a bias tape maker, rotary cutter, and 6-foot ruler.
If you are new to making bias strips for the binding and ties I found this post that will further explain how to cut the fabric.
After sewing the short sides of the mask turn right side out and press the seams.
You can view my how-to-make a face mask video below you can see all the steps as I sew a cloth face mask.
This mask design is comfortable to wear but it needs an opening for a removable filter to improve the filtration and it could use another layer of fabric otherwise I like this design.
Cricut Face Mask Pattern (SVG files)
My daughter, Olivia, found a free pattern for face masks on Circut Design Space. She used her Cricut Maker and the Cricut Explore (with a fabric cutting blade and cotton bonded fabric) cutting machines to cut out all the face mask pieces. To make it easier to learn how to make a mask we made a video of Olivia sewing a Circut pattern mask (please watch the video HERE.)
They turned out perfect and the mask fits the best and they also have a pocket that you can insert a filter (you can use coffee filters) too, therefore, this is our favorite face mask pattern. Please note that this mask can be used in health care situations with an N95 mask in filter pocket, but be advised to seek more information on this from your health care facility.
Additionally, Olivia found that if she made a few changes to the face mask pattern it made it more comfortable to wear, such as adding a pocket for a nose clip (used to prevent your glasses from fogging) and ties that have a section with elastic.
Sew a Simple Face Mask with Hair Ties
I found this beginner sewing pattern for a face mask on the CDC website, therefore I wanted to sew one too so I could share how I did it and then try it on to make a comparison to the others we have made.
I followed the instructions on the CDC website for cutting the fabrics, however, I did not follow their sewing instructions instead I modified the sewing instructions. Together with their cutting instructions and my modifications this mask took 15 minutes to create.
My modified sewing instructions are to place the cut pieces with the right sides together then pin and stitch the long sides then turn right sides out and press. Serge the raw edges then press over to form a casing for elastic or hair ties. If you would like to use hair ties then insert the ties in the casing next pin the casing over then stitch casing being careful not to sew through the hair tie.
That is it and this mask is ready to wear. However, in the final analysis, we did not think this mask fit well and it pulled on our ears. It has not nose clip and the shape and design are not conforming to the shape of a face. To sum it up this design is least comfortable and it would be difficult to modify to add a filter or another layer of fabric.
My Amazon Picks:
You might also enjoy these posts:
Learn how to build raised garden beds from pallet wood.
Quick buttery soda bread recipe.
Sometimes we all need a little inspiration for easy meals and recipes. I put together some recipes I think you will like. If you like easy everyday recipes then you might enjoy my favorite recipes delivered straight to your inbox click HERE.
Thank you so much for your visit today. I hope you have found some inspiration.
See you soon,