DIY Standing Bunny Reclaimed Pallet Wood

Sharing is caring!

Spring is a time of new beginnings; for this reason, as soon as the temperatures start to warm up, I create new projects such as DIY crafts, gardening, and cooking. I had a stack of pallets, so I decided to make a pallet wood project; also, I wanted it to be an easy project. I know how much fun my pallet bunny has brought my spring and Easter decor, so I tried to make some to share.

A DIY standing bunny from pallet wood would be a fun DIY Easter project. Therefore I made a pattern from the bunny I made last year. These standing bunnies are perfect to greet my family and guests. I know these will make someone else happy too.

This Easter bunny decoration project only takes a few minutes to build from the reclaimed pallet wood, however, taking apart the pallet does add another 10 minutes to the overall time.

This post contains affiliate links. That means that if you purchase from one of these links, I will make a small commission. However, you can rest assured you will not pay more for any products.

How to Build a DIY Standing Easter Bunny

Supplies and Tools:

• Reclaimed pallet
• Pattern (download here)
• Wood glue
• 1/2 staples
• Battens (cut from a scrap 2 x 4)
• 10″ base (cut from a scrap 2 x 4)
• Drill
• Drill bit (countersink)
• Stapler
• Band saw
• Sandpaper
• Chalk paint
• Chalk paintbrush
• Wood pencil
• Measuring tape

***For your convenience I have gathered all my favorite spring crafting must-haves HERE.

After gathering your supplies and tools, you can start building your Easter bunny decoration.

First, you have to deconstruct some pallets. You can see how we did that here.

Bunny Pattern

Assembling the bunny is especially easy if you set up a table since you need a flat surface to lay out the pallet wood. I used boards placed over a sawhorse as my work surface.

Also, I made a video about making the easy pallet bunny; you can see it here.

I am using the bunny pattern/template to determine where to place the smaller and larger pieces with attention to the bunny pattern placement.

Once I traced the bunny pattern on the wrong side of the pallet wood, I used applied wood glue between the boards.

Support Battens

Using a piece of scrap 2 x 4, I ripped them to make the support battens.

I determine the batten placement by placing them over the traced DIY pallet bunny (pieced of scrap wood) from the bunny’s bottom to above the ears’ tip.

The batten wood gives the bunny support, so adding them is very important to allow the bunny to stand up straight. Using wood glue in the area where the battens will be attached coupled with stapling and adding two screws will keep your Easter bunny decoration in a straight standing position for years. Moreover, if you are placing your bunny outside, be sure to use waterproof wood glue.

Staple the battens in place, particularly careful not to place any over the cut lines. I like to trace the ear cut lines over the battens before taking them to the saw.

For extra support, I add two wood screws on both battens into the bottom board coupled with the staples and wood glue; this forms a stable wood bunny.

Next is cutting it out with a band saw; as a rule, I wear eye protection when operating woodworking tools.

Note: I gathered up all the wood scraps; as a result, I have enough for another scrap wood project, such as Easter eggs.

Bunny Stand

Then I used a scrap wood 2 x 4 cut to 10″ for the bunny’s bottom or base; then, I marked the screw placement. To begin with, I drilled countersink holes for the screws.

Note: It is easier to paint the bunny before adding the stand.

The next step is to add the two wood screws into the base.

Finishing the Pallet Bunnies with Chalk Paint

How you finish your bunnies depends on if you want to leave it rustic and unfinished or sanded a little and chalk painted. Another equally important question is will your bunny be outside and possibly get wet?

If you use your bunny inside, you will not need a water-protective finish. However, if you will be using the bunny outside, you would need to use this type of water protective finish to protect the wood.

Easy pallet projects are fun to do together. Kids can join you for this scrap wood DIY craft by allowing them to trace the bunny pattern, paint, make the bow, and decorate them. See how to make easy bows here.

These easy DIY home decor projects are inexpensive beginner woodworking projects anyone can build. The one-board-bench the bunny is standing on is another one of my easy woodworking projects for beginners.

 

More DIY Craft ideas for reclaimed wood:

A farmhouse vintage toolbox inspired this adorable scrap wood project. Also, you can use this wooden tote all year for storage and home decor.

You might also like to build some Pallet Pumpkins together with the bunny project.

Chalk-painted wood signs for both spring and Easter.

More Easter Inspired DIY Crafts and recipes:

Up-cycle an old screen door or scrap wood to make a chalkboard, making it almost a “free” craft project. Moreover, you will find a simple DIY bird nest and DIY candle holders up-cycled as display stands.

 

Thank you for your visit today. I enjoy hearing from my readers, so please leave a hello in the comments below.

Happy and Healthy Spring,

Kippi